iecee logo

Worldwide System for Conformity Testing and Certification of Electrotechnical Equipment and Components (IECEE)
 



NEW ACCEPTED IEC STANDARDS IN THE IECEE CB-SCHEME

Dividor


Just Published logo

No. 24 - 2015-05-11
 


GUIDELINES

The Member NCB(s) of the IECEE are the sole Organizations in conjunction with their associated CBTL(s), in the field of the IECEE operations, entitled to apply to operate the relevant IEC standard(s), edition(s) and amendment(s).

When National Differences exist against the relevant IEC standards, it is the responsibility of the Member NCB(s) to declare such status for each standard/edition(s)/amendment(s) and provide details of such National Differences by sending an email with the details to the IECEE Secretariat.

The Member Body is required to endorse the National Differences, Special National Conditions, Group Differences, by being copied in the email sent to the IECEE Secretariat. Regulatory Requirements shall be declared under the responsibility of the NCB.

IECEE Member NCB(s) are kindly requested to provide this information in electronic format (MSWord).

The Member NCB(s) “Scope Extension Request” can be declared/requested either by using the:

*Note: The Fast Track Extension request requires an application that shall be addressed to the IECEE Secretariat according to draft OD-CB2007 as applicable.

**Note: The Scope Extension request requires an application that shall be addressed to the IECEE Secretariat according to OD-CB2007 Part 5 or 7 as applicable.

For Member NCB(s) located in the same country where Regulatory Requirements, National Differences, Special National Conditions and Group Differences apply, it is the responsibility of the Member NCB(s) to coordinate, nationally, in order to provide the required information to the IECEE Secretariat once.

Of course the NCB must coordinate with their Member Body or the IEC National Committee to make sure that they are provided with the appropriate information.


Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 1 (2007-01-12)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 2 (2007-04-23)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 3 (2008-02-29)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 4 (2008-04-11)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 5 (2008-05-13)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 6 (2008-06-03)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 7 (2008-07-09)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 8 (2008-08-11)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 9 (2008-09-16)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.10(2008-10-17)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.11(2009-01-19)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.12(2009-03-04)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.13(2009-03-30)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.14(2009-05-25)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.15(2009-07-27)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.16(2010-02-01)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.17(2010-02-08)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.18(2010-03-23)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.19(2010-10-25)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.20(2011-08-18)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.21(2012-06-12)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.22(2013-09-02)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.23(2014-06-19)



Dividor

IECEE CB-Scheme Standards Product Categories
Dividor
 

BATT - Batteries

IEC 60086-4 ed3.0 (2007-09)
Primary batteries - Part 4: Safety of lithium batteries

IEC 60086-4 ed4.0 (2014-09)
Primary batteries - Part 4: Safety of lithium batteries

IEC 62282-3-100 ed1.0 (2012-02)
Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety

 

separator

CABL - Cables and Cords

IEC 60502-2 ed3.0 (2014-02)
Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)

CAP - Capacitors as components

IEC 60831-2 ed3.0 (2014-02)
Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V - Part 2: Ageing test, self-healing test and destruction test


CONT - Switches for appliances and automatic controls for electrical household appliances

IEC 60730-2-5 ed4.0 (2013-11)
Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems

IEC 60730-2-7 ed3.0 (2015-03)
Automatic electrical controls - Part 2-7: Particular requirements for timers and time switches

Pre-release of the official standard

Project IEC 60730-2-9 ed4.0 (2015-02)
Automatic electrical controls – Part 2-9: Particular requirements for temperature sensing controls

IEC 60730-2-22 ed1.0 (2014-05)
Automatic electrical controls - Part 2-22: Particular requirements for thermal motor protectors

IEC 60255-27 ed2.0 (2013-10)
Measuring relays and protection equipment - Part 27: Product safety requirements


E3- IECEE Energy Efficiency

IEC 60705-am1 ed4.0 (2014-06)
Amendment 1 - Household microwave ovens - Methods for measuring performance

 

ELVH - Electrical Vehicle

IEC 62196-1 ed3.0 (2014-06)
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements

IEC 62196-3 ed1.0 (2014-06)
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers

IEC 62301 ed2.0 (2011-01)
Household electrical appliances - Measurement of standby power



EMC - Electromagnetic Compatability

IEC 60947-1-am2 ed5.0 (2014-09)
Amendment 2 - Low-voltage switchgear and controlgear - Part 1: General rules

IEC 61000-3-2 ed4.0 (2014-05)
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)

IEC 61000-4-8 ed2.0 (2009-09)
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test

IEC 61000-4-15 ed2.0 (2010-08)
Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications

IEC 61000-6-7 ed1.0 (2014-10)
Electromagnetic compatibility (EMC) - Part 6-7: Generic standards - Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations

CISPR 13-am1 ed5.0 (2015-01)
Amendment 1 - Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement

CISPR 16-2-3-am1 ed3.0 (2010-06)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements

CISPR 16-2-3-am2 ed3.0 (2014-03)
Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements


 

HOUS - Household and similar equipment

Project IEC 60335-2-25-am1 ed6.0 (2014-05)
Amendment 1 - Household and similar electrical appliances – Safety – Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens

IEC 60335-2-56-am2 ed3.0 (2014-08)
Amendment 2 - Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances

IEC 60335-2-65-am2 ed2.0 (2015-01)
Amendment 2 - Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances

IEC 60335-2-82-am2 ed2.0 (2015-01)
Amendment 2 - Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines

IEC 60335-2-90-am2 ed3.0 (2014-09)
Amendment 2 - Household and similar electrical appliances - Safety - Part 2-90: Particular requirements for commercial microwave ovens

IEC 60335-2-95 ed3.0 (2011-09)
Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use

IEC 60335-2-95-am1 ed3.0 (2015-01)
Amendment 1 - Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use

IEC 60335-2-101-am2 ed1.0 (2014-08)
Amendment 2 - Household and similar electrical appliances - Safety - Part 2-101: Particular requirements for vaporizers


INDA - Industrial Automation

P-IEC 60947-1 ed1.0 (1988-01)
Low-voltage switchgear and controlgear. Part 1: General rules.

P-IEC 60947-1-am1 ed1.0 (1994-10)
Amendment 1 - Low-voltage switchgear and controlgear. Part 1: General rules.

P-IEC 60947-1 ed2.0 (1996-09)
Low-voltage switchgear and controlgear - Part 1: General rules

P-IEC 60947-1-am1 ed2.0 (1997-12)
Amendment 1 - Low-voltage switchgear and controlgear - Part 1: General rules

P-IEC 60947-1-am2 ed2.0 (1998-06)
Amendment 2 - Low-voltage switchgear and controlgear - Part 1: General rules

P-IEC 60947-1 ed3.0 (1999-02)
Low-voltage switchgear and controlgear - Part 1: General rules

P-IEC 60947-1-am1 ed3.0 (2000-08)
Amendment 1 - Low-voltage switchgear and controlgear - Part 1: General rules

P-IEC 60947-1-am2 ed3.0 (2001-10)
Amendment 2 - Low-voltage switchgear and controlgear - Part 1: General rules

P-IEC 60947-1 ed4.0 (2004-03)
Low-voltage switchgear and controlgear - Part 1: General rules

IEC 60947-1 ed5.0 (2007-06)
Low-voltage switchgear and controlgear - Part 1: General rules

IEC 60947-1-am1 ed5.0 (2010-12)
Amendment 1 - Low-voltage switchgear and controlgear - Part 1: General rules

P-IEC 60947-2 ed1.0 (1989-01)
Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

P-IEC 60947-2-am1 ed1.0 (1992-01)
Amendment 1 -

P-IEC 60947-2 ed2.0 (1995-12)
Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

P-IEC 60947-2-am1 ed2.0 (1997-11)
Amendment 1 - Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

P-IEC 60947-2-am2 ed2.0 (2001-07)
Amendment 2 - Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

IEC 60947-5-6 ed1.0 (1999-12)
Low-voltage switchgear and controlgear - Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR)

IEC 60947-5-7 ed1.0 (2003-06)
Low-voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching elements - Requirements for proximity devices with analogue output



INST - Installation accessories and connection devices

IEC 60320-3 ed1.0 (2014-10)
Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges

IEC 60884-1-am2 ed3.0 (2013-02)
Amendment 2 - Plugs and socket-outlets for household and similar purposes - Part 1: General requirements

IEC 60669-2-5 ed1.0 (2013-10)
Switches for household and similar fixed electrical installations - Part 2-5: Particular requirements - Switches and related accessories for use in home and building electronic systems (HBES)

IEC 60670-1 ed2.0 (2015-03)
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements

IEC 60884-2-7-am1 ed1.0 (2013-06)
Amendment 1 - Plugs and socket-outlets for household and similar purposes - Part 2-7: Particular requirements for cord extension sets

IEC 61534-1-am1 ed2.0 (2014-06)
Amendment 1 - Powertrack systems - Part 1: General requirements

IEC 61534-21 ed2.0 (2014-06)
Powertrack systems - Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting

IEC 62477-1 ed1.0 (2012-07)
Safety requirements for power electronic converter systems and equipment - Part 1: General

 

LITE - Lighting

IEC 60081-am5 ed5.0 (2013-07)
Amendment 5 - Double-capped fluorescent lamps - Performance specifications

IEC 60400-am2 ed7.0 (2014-06)
Amendment 2 - Lampholders for tubular fluorescent lamps and starterholders

IEC 60432-1-am2 ed2.0 (2011-12)
Amendment 2 - Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes

IEC 60432-3 ed2.0 (2012-07)
Incandescent lamps - Safety specifications - Part 3: Tungsten halogen lamps (non-vehicle)

P-IEC 60598-1 ed7.0 (2008-04)
Luminaires - Part 1: General requirements and tests

IEC 60598-1 ed8.0 (2014-05)
Luminaires - Part 1: General requirements and tests

IEC 60598-2-20 ed4.0 (2014-11)
Luminaires - Part 2-20: Particular requirements - Lighting chains

IEC 60598-2-21 ed1.0 (2014-11)
Luminaires - Part 2-21: Particular requirements - Rope lights

IEC 60598-2-22 ed4.0 (2014-06)
Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting

IEC 60901-am6 ed2.0 (2014-12)
Amendment 6 - Single-capped fluorescent lamps - Performance specifications

IEC 60927-am1 ed3.0 (2013-09)
Amendment 1 - Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements

IEC 60968 ed3.0 (2015-02)
Self-ballasted fluorescent lamps for general lighting services - Safety requirements

IEC 61195-am1 ed2.0 (2012-10)
Amendment 1 - Double-capped fluorescent lamps - Safety specifications

IEC 61195-am2 ed2.0 (2014-09)
Amendment 2 - Double-capped fluorescent lamps - Safety specifications

IEC 61199-am2 ed3.0 (2014-07)
Amendment 2 - Single-capped fluorescent lamps - Safety specifications

IEC 61347-2-1-am2 ed1.0 (2013-09)
Amendment 2 - Lamp controlgear - Part 2-1: Particular requirements for starting devices (other than glow starters)

IEC 61347-2-13 ed2.0 (2014-09)
Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules

IEC 61549-am2 ed2.0 (2010-02)
Amendment 2 - Miscellaneous lamps

IEC 61549-am3 ed2.0 (2012-07)
Amendment 3 - Miscellaneous lamps

IEC 62031-am2 ed1.0 (2014-09)
Amendment 2 - LED modules for general lighting - Safety specifications

IEC 62035-am2 ed1.0 (2012-07)
Amendment 2 - Discharge lamps (excluding fluorescent lamps) - Safety specifications

IEC 62612 ed1.0 (2013-06)
Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements

IEC/PAS 62717 ed1.0 (2011-04)
LED modules for general lighting - Performance requirements

IEC 62722-1 ed1.0 (2014-09)
Luminaire performance - Part 1: General requirements

IEC/PAS 62722-2-1 ed1.0 (2011-06)
Luminaire performance - Part 2-1: Particular requirements for LED luminaires

IEC 62776 ed1.0 (2014-12)
Double-capped LED lamps designed to retrofit linear fluorescent lamps - Safety specifications

IEC 62778 ed1.0 (2012-06)
Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires

IEC/TR 62778 ed2.0 (2014-06)
Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires

IEC 62868 ed1.0 (2014-09)
Organic light emitting diode (OLED) panels for general lighting - Safety requirements

MEAS - Measurement, Control and Laboratory equipment

IEC 60044-7 ed1.0 (1999-12)
Instrument transformers - Part 7: Electronic voltage transformers

IEC 60044-8 ed1.0 (2002-07)
Instrument transformers - Part 8: Electronic current transformers

IEC 61010-2-051:2015 Edition 3.0 (2015-03-10)Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring

IEC 61010-2-010 ed3.0 (2014-09)
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials

IEC 61010-031-am1 ed1.0 (2008-02)
Amendment 1 - Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test

IEC 61010-2-081 ed2.0 (2015-01)
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes

IEC 61010-2-101 ed2.0 (2015-01)
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment

EC 61869-1 ed1.0 (2007-10)
Instrument transformers - Part 1: General requirements

IEC 61869-2 ed1.0 (2012-09)
Instrument transformers - Part 2: Additional requirements for current transformers

IEC 61869-3 ed1.0 (2011-07)
Instrument transformers - Part 3: Additional requirements for inductive voltage transformers

IEC 61869-5 ed1.0 (2011-07)
Instrument transformers - Part 5: Additional requirements for capacitor voltage transformers


MED - Electrical equipment for medical use

IEC 60601-1-6-am1 ed3.0 (2013-10)
Amendment 1 - Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability

IEC 60601-1-9-am1 ed1.0 (2013-06)
Amendment 1 - Medical electrical equipment - Part 1-9: General requirements for basic safety and essential performance - Collateral Standard: Requirements for environmentally conscious design

IEC 60601-1-10-am1 ed1.0 (2013-11)
Amendment 1 - Medical electrical equipment - Part 1-10: General requirements for basic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loop controllers

IEC 60601-1-11 ed2.0 (2015-01)
Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment

IEC 60601-1-12 ed1.0 (2014-06)
Medical electrical equipment - Part 1-12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment

IEC 60601-2-1-am1 ed3.0 (2014-07)
Amendment 1 - Medical electrical equipment - Part 2-1: Particular requirements for the basic safety and essential performance of electron accelerators in the range 1 MeV to 50 MeV

IEC 60601-2-11 ed3.0 (2013-01)
Medical electrical equipment - Part 2-11: Particular requirements for the basic safety and essential performance of gamma beam therapy equipment

IEC 60601-2-17 ed3.0 (2013-11)
Medical electrical equipment - Part 2-17: Particular requirements for the basic safety and essential performance of automatically-controlled brachytherapy afterloading equipment

IEC 80601-2-30-am1 ed1.0 (2013-07)
Amendment 1 - Medical electrical equipment - Part 2-30: Particular requirements for the basic safety and essential performance of automated type non-invasive sphygmomanometers

IEC 60601-2-36 ed2.0 (2014-04)
Medical electrical equipment - Part 2-36: Particular requirements for the basic safety and essential performance of equipment for extracorporeally induced lithotripsy

IEC 60601-2-41-am1 ed2.0 (2013-10)
Amendment 1 - Medical electrical equipment - Part 2-41: Particular requirements for the basic safety and essential performance of surgical luminaires and luminaires for diagnosis

IEC 60601-2-47 ed2.0 (2012-02)
Medical electrical equipment - Part 2-47: Particular requirements for the basic safety and essential performance of ambulatory electrocardiographic systems

IEC 60601-2-52-am1 ed1.0 (2015-03)
Amendment 1 - Medical electrical equipment - Part 2-52: Particular requirements for the basic safety and essential performance of medical beds

IEC 60601-2-62 ed1.0 (2013-07)
Medical electrical equipment - Part 2-62: Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment

IEC 60601-2-68 ed1.0 (2014-09)
Electrical medical equipment - Part 2-68: Particular requirements for the basic safety and essential performance of X-ray-based image-guided radiotherapy equipment for use with electron accelerators, light ion beam therapy equipment and radionuclide beam therapy equipment

IEC 62366-am1 ed1.0 (2014-01)
Amendment 1 - Medical devices - Application of usability engineering to medical devices

IEC 62353 ed2.0 (2014-09)
Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment

IEC 80601-2-58 ed2.0 (2014-09)
Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery

MISC - Miscellaneous

IEC 60076-2 ed3.0 (2011-02)
Power transformers - Part 2: Temperature rise for liquid-immersed transformers

IEC 60825-1 ed3.0 (2014-05)
Safety of laser products - Part 1: Equipment classification and requirements

IEC 60825-4 ed2.0 (2006-08)
Safety of laser products - Part 4: Laser guards

IEC 60825-4-am2 ed2.0 (2011-03)
Amendment 2 - Safety of laser products - Part 4: Laser guards

OFF - IT and office equipment

IEC 62040-4 ed1.0 (2013-04)
Uninterruptible power systems (UPS) - Part 4: Environmental aspects - Requirements and reporting

IEC 62368-1 ed2.0 (2014-02)
Audio/video, information and communication technology equipment - Part 1: Safety requirements

POW - Low voltage, high power switching equipment

 

IEC 60947-1-am2 ed5.0 (2014-09)
Amendment 2 - Low-voltage switchgear and controlgear - Part 1: General rules

IEC 60947-4-3 ed2.0 (2014-05)
Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads

IEC 60947-6-1-am1 ed2.0 (2013-12)
Amendment 1 - Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment

IEC 60947-7-4 ed1.0 (2013-08)
Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors

IEC 60947-8-am1 ed1.0 (2006-09)
Amendment 1 - Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines

IEC 60947-8-am2 ed1.0 (2011-05)
Amendment 2 - Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines

IEC 61439-5 ed2.0 (2014-08)
Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks

IEC 62271-100-am1 ed2.0 (2012-09)
Amendment 1 - High-voltage switchgear and controlgear - Part 100: Alternating current circuit-breakers

IEC 62271-102-am1 ed1.0 (2011-08)
Amendment 1 - High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches

IEC 62271-102-am2 ed1.0 (2013-02)
Amendment 2 - High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches

IEC 62271-103 ed1.0 (2011-06)
High-voltage switchgear and controlgear - Part 103: Switches for rated voltages above 1 kV up to and including 52 kV

IEC 62271-104 ed1.0 (2009-04)
High-voltage switchgear and controlgear - Part 104: Alternating current switches for rated voltages of 52 kV and above

IEC 62271-105 ed2.0 (2012-09)
High-voltage switchgear and controlgear - Part 105: Alternating current switch-fuse combinations for rated voltages above 1 kV up to and including 52 kV

IEC 62271-107 ed2.0 (2012-05)
High-voltage switchgear and controlgear - Part 107: Alternating current fused circuit-switchers for rated voltages above 1 kV up to and including 52 kV

IEC 62271-200 ed2.0 (2011-10)
High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV

PROT - Installation protective equipment

IEC 60099-6 ed1.0 (2002-08)
Surge arresters - Part 6: Surge arresters containing both series and parallel gapped structures - Rated 52 kV and less

IEC 60099-8 ed1.0 (2011-01)
Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV

IEC 60127-2 ed3.0 (2014-09)
Miniature fuses - Part 2: Cartridge fuse-links

IEC 60127-3 ed3.0 (2015-01)
Miniature fuses - Part 3: Sub-miniature fuse-links

IEC 60127-6 ed2.0 (2014-09)
Miniature fuses - Part 6: Fuse-holders for miniature fuse-links

IEC 60269-1-am2 ed4.0 (2014-06)
Amendment 2 - Low-voltage fuses - Part 1: General requirements

IEC 60269-3-am1 ed4.0 (2013-01)
Amendment 1 - Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F

IEC 60282-2 ed3.0 (2008-04)
High-voltage fuses - Part 2: Expulsion fuses

IEC 61008-1-am2 ed3.0 (2013-09)
Amendment 2 - Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules

IEC 61009-1-am2 ed3.0 (2013-09)
Amendment 2 - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules

IEC 62606 ed1.0 (2013-07)
General requirements for arc fault detection devices

IEC 62640 ed1.0 (2011-01)
Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses

PV - Photovoltaics

IEC 62116 ed2.0 (2014-02)
Utility-interconnected photovoltaic inverters - Test procedure of islanding prevention measures




SAFE - Saftey transformers and similar equipment

P-IEC 60044-2-am2 ed1.0 (2002-12)
Amendment 2 - Instrument transformers - Part 2: Inductive voltage transformers

IEC 61558-2-15 ed2.0 (2011-11)
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-15: Particular requirements and tests for isolating transformers for the supply of medical locations

IEC 61558-2-16-am1 ed1.0 (2013-08)
Amendment 1 - Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units

IEC 61558-2-20 ed2.0 (2010-06)
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-20: Particular requirements and tests for small reactors

separator

TOOL - Portable tools

IEC 61029-2-12 ed1.0 (2010-05)
Safety of transportable motor-operated electric tools - Part 2-12: Particular requirements for threading machines

IEC 62841-2-2 ed1.0 (2014-05)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-2: Particular requirements for hand-held screwdrivers and impact wrenches

IEC 62841-2-4 ed1.0 (2014-06)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type

IEC 62841-2-5 ed1.0 (2014-06)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-5: Particular requirements for hand-held circular saws

IEC 62841-3-1 ed1.0 (2014-06)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws

IEC 62841-3-6 ed1.0 (2014-05)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system

IEC 62841-3-9 ed1.0 (2014-08)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws


separator

TOYS - Electric Toys

 

TRON - Electronics, entertainment

IEC 60065 ed8.0 (2014-06)
Audio, video and similar electronic apparatus - Safety requirements

IEC 62368-1 ed2.0 (2014-02)
Audio/video, information and communication technology equipment - Part 1: Safety requirements

IEC 62841-2-9 ed1.0 (2015-01)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-9: Particular requirements for hand-held tappers and threaders


NOTE:

If you have a received a request from the industry to certify for any additional IEC standard(s) that is not listed here, that you would like to add to the IECEE CB-Scheme, please send the IECEE Secretariat an email.


separator

WITHDRAWN/REPLACED PUBLICATIONS

Publication withdrawn TC Replaced by
There are no withdrawn/replaced publications    

Copyright © IECEE 2007. All Rights Reserved.

If you have any questions and/or comments, please contact The IECEE Secretariat.